Washer Repair in Metairie — Book a Visit Today

We repair washers in Metairie, top load and front load, and we install them too, so the swap-or-fix talk stays honest. Call us or send the form with your model number. Standing water in the drum after a full cycle points to the pump, the hose, or the lid switch. Front loaders here also pick up a sour smell when the door boot stays damp, which humidity does to them. We open the machine, test the drain path, and check bearings before anything else. Walking, banging, a shirt caught in the tub, a code that stops the spin: all of it has a cause we can name.

Real person answers
Open 7 days
Written quotes

Call (800) 712-6387

A real person answers
Open 7 days
Written quote before work starts

Taking calls until 5:00 PM CT

Washer Repair technician in Metairie, LA

Common washer faults in Metairie homes

"It's full of water and won't drain" Blocked drain pump, kinked hose, or clogged filter
"Spin cycle sounds like a jet taking off" Worn tub bearing, bad shocks, or a loose drum
"Clothes come out soaking wet" Spin function failed: belt, motor coupler, or lid switch
"Water barely trickles in" Sediment-clogged inlet valve or screens, low supply pressure
"It walks across the laundry room" Off-level feet, worn suspension rods, or unbalanced load sensing

Metairie coverage

We cover all of Metairie, including 70001, 70003, and 70005, plus nearby Jefferson, River Ridge, Kenner, and into New Orleans.

Other repairs we do in Metairie

Washer Repair in cities near Metairie

Washer Repair — New Orleans, LA

All washer repair → · Metairie service directory →

How it works

Step 1
Tell us the symptom
Describe what you hear, see, or smell. Grinding, leaking, no heat, an error code on the panel. Those details let us load likely parts on the van before we ever pull into your driveway.
Step 2
We diagnose in person
Our technician tests the machine, checks power and water lines, and finds the part that actually failed. Well-water sediment and clogged valves fool a lot of guesswork. We confirm the cause before touching a wrench.
Step 3
Fix it or swap it
You get the honest read. Some machines need one part and have years left in them. Others are worn past sense. Because we also install, we can set the replacement level and connected on the same visit.

Call (800) 712-6387

A real person answers
Open 7 days
Written quote before work starts

Washer Repair in Metairie — quick answers

Is a leaking front-load washer worth repairing?

Usually yes. Most front-load leaks trace back to the door boot, a loose hose clamp, or a cracked dispenser housing, and those are all replaceable parts. We check where the water lands first, because that tells us the source faster than guessing does.

Why does my washer smell musty?

Moisture sits in the folds of the door seal and inside the drain hose. Wipe the boot dry, leave the door open between loads, and run a tub-clean cycle. If the odor stays, a partly clogged drain line or pump housing is usually holding water.

How long does a washer repair visit take?

Many repairs finish in one visit once we've diagnosed the machine. If a part has to be ordered, say a control board or a bearing kit, we schedule a return trip and tell you what we're waiting on before we leave.

Should I repair or replace an older washer?

We install machines too, so we'll say it straight. If the drum bearing and the transmission are both gone on a ten-year-old unit, replacement usually wins. A pump, valve, switch, or belt on an otherwise solid washer is worth fixing.

How soon can someone get to my house in Metairie?

Most Metairie calls get a slot within a day or two, and same-day is often possible if you reach us in the morning. After a tornado warning or a heavy storm week, the phones jump and the board fills up faster. Call us with your appliance brand and what it's doing, and we'll tell you the honest next opening.

How it works

Step 1
Tell us the symptom
Describe what you hear, see, or smell. Grinding, leaking, no heat, an error code on the panel. Those details let us load likely parts on the van before we ever pull into your driveway.
Step 2
We diagnose in person
Our technician tests the machine, checks power and water lines, and finds the part that actually failed. Well-water sediment and clogged valves fool a lot of guesswork. We confirm the cause before touching a wrench.
Step 3
Fix it or swap it
You get the honest read. Some machines need one part and have years left in them. Others are worn past sense. Because we also install, we can set the replacement level and connected on the same visit.

Call (800) 712-6387

A real person answers
Open 7 days
Written quote before work starts

Questions worth asking any repair company

Ask these of anyone you let into your home — us included. Call and we'll answer all five before you book anything.

1Ask for their license numberThen verify it with your state licensing board rather than taking it on trust.
2Ask for proof of insuranceLiability cover protects you if something goes wrong in your home.
3Get the quote in writingIncluding the trip fee, whether it's credited against the repair, and parts.
4Ask how they handle callbacksIf the same fault returns, what happens? Get the answer before work begins.
5Check their own reviewsLook the business up independently — their Google profile, not just what they tell you.

Why homeowners call us

Two families, one crewWe are not a call center routing tickets to strangers. The person answering the phone knows the technicians by name, and you get the same small group of hands in your kitchen and laundry room every time.
Straight swap-vs-fix talkInstallers see what breaks in year two. Repair techs see what lasts a decade. We do both, so we will tell you when a repair makes sense and when your money belongs in a new machine instead.
Storm season readyTornado season brings surges, outages, and flooded utility rooms. Control boards fry, and motors seize after water sits. We stock common boards and dry-run every machine before we leave, so you are not calling us back next week.
Well water experienceSediment and hard minerals wreck inlet valves, dishwasher jets, and ice makers. We see it constantly out past the city lines. We clean, we replace, and we show you the filter habit that keeps the same failure from coming back.
All major brands, gas & electricWhirlpool, Samsung, LG, GE, Maytag, Bosch, KitchenAid and more — as an independent repair company.
Straight answersIf it isn't worth repairing, we'll say so — often on the phone.