Stove & Range Repair in Lubbock — Book a Visit Today

We fix burners that click but never catch and electric coils that stay cold while the others glow. Stovetop trouble is usually one bad part, like an igniter, a switch, or a burned connection under the cooktop. Gas smell is different: shut the valve and call us right away. Across Lubbock we see spilled-over igniters and worn control knobs more than anything exotic. We test each burner, check the wiring, and clean out whatever is blocking the flame. Older ranges sometimes make more sense to replace, and we'll say so. Call us or send details through the quote form.

Real person answers
Open 7 days
Written quotes

Call (800) 712-6387

A real person answers
Open 7 days
Written quote before work starts

Taking calls until 5:00 PM CT

Stove & Range Repair technician in Lubbock, TX

Common stove & range faults in Lubbock homes

The burner clicks and clicks but never lights Spark igniter, a clogged burner port, or a cracked igniter electrode
Oven says it's at 350 but nothing browns Failed oven temperature sensor, or a control that needs calibration
One coil stays cold, the rest work fine Burnt surface element, damaged receptacle, or a worn infinite switch
Whole cooktop is dead after the storm Tripped breaker, blown fuse, or surge damage to the control board
Gas smell near the range when nobody is cooking Loose supply connection or a leaking valve. Shut off the gas and call for help

Lubbock coverage

We cover Lubbock proper in 79401, 79403, 79407 and 79410, and we make runs out toward Amarillo, Midland and Odessa when scheduling lines up.

Other repairs we do in Lubbock

Stove & Range Repair in cities near Lubbock

Stove & Range Repair service hub → · All Lubbock services →

How it works

Step 1
Tell us the symptom
Describe what you hear, see, or smell. Grinding, leaking, no heat, an error code on the panel. Those details let us load likely parts on the van before we ever pull into your driveway.
Step 2
We diagnose in person
Our technician tests the machine, checks power and water lines, and finds the part that actually failed. Well-water sediment and clogged valves fool a lot of guesswork. We confirm the cause before touching a wrench.
Step 3
Fix it or swap it
You get the honest read. Some machines need one part and have years left in them. Others are worn past sense. Because we also install, we can set the replacement level and connected on the same visit.

Call (800) 712-6387

A real person answers
Open 7 days
Written quote before work starts

Stove & Range Repair in Lubbock — quick answers

Gas or electric: does it change the repair?

Yes. Gas ranges bring igniters, valves, and safety devices into the picture. Electric ranges lean on elements, switches, and heavy wiring. We service both, and we confirm the connection type before we order any part for your unit.

My oven bakes unevenly. Is that fixable?

Usually. Uneven baking often points at a weak bake element, a failing sensor, or a convection fan that quit turning. Warped racks and a bad door seal will do it too. We measure actual cavity temperature instead of trusting the display.

Should I repair this range or replace it?

Depends on the part, the age, and the shape the cabinet and cooktop are in. Since we also install, we say it straight. A single element or igniter is worth fixing. Rust through the body, or a failed board on a very old range, often is not.

Can well water hurt a range?

Not directly. Sediment-heavy water does leave mineral crust behind on spills and steam-cleaning cycles, and hard water film builds up on the door glass. The bigger well-water problems show up in dishwashers and ice makers, which we also handle.

How soon can someone get to my house in Lubbock?

Most in-town calls get a same-week window, often sooner if a truck is already on your side of the Loop. After a big storm knocks power out, boards fail all over town at once and the calendar tightens up fast. Call us early in the day for the surest chance at a quick slot.

How it works

Step 1
Tell us the symptom
Describe what you hear, see, or smell. Grinding, leaking, no heat, an error code on the panel. Those details let us load likely parts on the van before we ever pull into your driveway.
Step 2
We diagnose in person
Our technician tests the machine, checks power and water lines, and finds the part that actually failed. Well-water sediment and clogged valves fool a lot of guesswork. We confirm the cause before touching a wrench.
Step 3
Fix it or swap it
You get the honest read. Some machines need one part and have years left in them. Others are worn past sense. Because we also install, we can set the replacement level and connected on the same visit.

Call (800) 712-6387

A real person answers
Open 7 days
Written quote before work starts

Questions worth asking any repair company

Ask these of anyone you let into your home — us included. Call and we'll answer all five before you book anything.

1Ask for their license numberThen verify it with your state licensing board rather than taking it on trust.
2Ask for proof of insuranceLiability cover protects you if something goes wrong in your home.
3Get the quote in writingIncluding the trip fee, whether it's credited against the repair, and parts.
4Ask how they handle callbacksIf the same fault returns, what happens? Get the answer before work begins.
5Check their own reviewsLook the business up independently — their Google profile, not just what they tell you.

Why homeowners call us

Two families, one crewWe are not a call center routing tickets to strangers. The person answering the phone knows the technicians by name, and you get the same small group of hands in your kitchen and laundry room every time.
Straight swap-vs-fix talkInstallers see what breaks in year two. Repair techs see what lasts a decade. We do both, so we will tell you when a repair makes sense and when your money belongs in a new machine instead.
Storm season readyTornado season brings surges, outages, and flooded utility rooms. Control boards fry, and motors seize after water sits. We stock common boards and dry-run every machine before we leave, so you are not calling us back next week.
Well water experienceSediment and hard minerals wreck inlet valves, dishwasher jets, and ice makers. We see it constantly out past the city lines. We clean, we replace, and we show you the filter habit that keeps the same failure from coming back.
All major brands, gas & electricWhirlpool, Samsung, LG, GE, Maytag, Bosch, KitchenAid and more — as an independent repair company.
Straight answersIf it isn't worth repairing, we'll say so — often on the phone.